Pump Room Shed
A compact pump housing keeps an irrigation or water pump out of the sun and out of sight, protected and serviceable. This one is a small, ventilated footprint sized around the pump with just enough access to maintain it.
AED 4,600 – 5,850
A planning guide from the live bill of materials — not a quote. Costs vary with materials and finish; our UAE team can review your design before quoting.
- Recommended size
- 1.5 × 1 m · 5 × 3 ft
- Footprint
- 1.5 m²
- Size (W × D × H)
- 1.5 × 1 × 2.1 m
- Est. material weight
- ~626 kg
Why this size for a Pump Room Shed
A pump housing only needs to cover the equipment plus a hand's reach around it for maintenance — going bigger wastes garden and money. Around 1.5 × 1 m fits a typical irrigation or booster pump with room to reach the connections and isolate it. The priorities here are shade, ventilation and access, not floor area.
What to include
- check_circleVentilation to keep the motor cool and prevent heat build-up in a small space.
- check_circleAccess to reach pipework, valves and the isolation switch for servicing.
- check_circleA shaded, weather-tight enclosure to protect the pump from sun and dust.
These options are reflected in the estimate above — add, remove or change them any time in the 3D planner and the cost updates live.
Cost breakdown
| Category | Estimate |
|---|---|
| Cladding | AED 1,620 |
| Timber Frame | AED 561 |
| Sheathing / Skin | AED 445 |
| Roofing | AED 291 |
| Fixings & Trims | AED 787 |
| Windows | AED 448 |
| Door & Hardware | AED 720 |
| Foundation | AED 290 |
| Extras & Finishing | AED 50 |
| Total (materials) | AED 5,212 |
What you’ll need
- Cladding area
- 11.3 m²
- Framing timber
- 80.1 m
- Wall area
- 9.8 m²
- Roof / ceiling area
- 1.5 m²
- Estimated weight
- ~626 kg
Shed Ventilation Guide: Preventing Mould and Heat Trap
Building this in the UAE
A garden shed this size is often a minor structure, but rules vary by emirate and developer — check before you build. For the climate, choose heat- and humidity-tolerant materials and plan for ventilation and shade.
Frequently asked questions
How big does a pump housing need to be?
Only as big as the pump plus room to service it — around 1.5 × 1 m suits most domestic irrigation or booster pumps. If you're housing a pressure vessel or controls too, size up in the planner.
Why house a water pump in a shed?
Shade and shelter extend a pump's life in a hot, dusty climate, cut noise, and keep the wiring and connections protected. A small ventilated enclosure does the job without taking much garden.
Does a pump room need ventilation?
Yes — even a small motor generates heat that builds up fast in an enclosed box, shortening its life. A couple of vents keep air moving. This estimate includes ventilation sized for the space.
Design your Pump Room Shed
Open this configuration in the 3D planner — change the size, materials, doors, windows and extras, and watch the bill of materials update live.
Open in the 3D planner